View TM056KDH02_7894660.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

shanghai tianma micro- electronics TM056KDH02 v2.3 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 1 of 23 coversheet model no. : TM056KDH02 issued date: 2009-12-16 version : ver 2.3 preliminary specification final product specification customer : approved by notes shanghai tianma confirmed : prepared by checked by approved by this technical specification is subjected to change without notice
shanghai tianma micro- electronics TM056KDH02 v2.3 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 2 of 23 table of contents coversheet ........................................................................................................................................ 1 table of contents .............................................................................................................................. 2 record of revision ............................................................................................................................ 3 1 general specifications ............................................................................................................... 4 2 input/output terminals ............................................................................................................... 5 3 absolute maximum ratings ....................................................................................................... 7 4 electrical characteristics ............................................................................................................ 8 5 timing chart ............................................................................................................................. 10 6 optical characteristics ............................................................................................................. 15 7 environmental / reliability test ................................................................................................ 19 8 mechanical drawing ................................................................................................................. 20 9 packing drawing ...................................................................................................................... 21 10 precautions for use of lcd modules ....................................................................................... 23
shanghai tianma micro- electronics TM056KDH02 v2.3 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 3 of 23 record of revision rev issued date description editor 1.0 2008-06-26 preliminary release youkui shang 2.0 2008-10-10 modify the chromaticity x/y upper and lower limit value haijun he 2.1 2008-12-17 modify the model name from ts056kaavd02-00. peng lei 2.2 2009-02-06 update timing parameter yanguangchen 2.3 2009-12-16 update operating life time in page 8 update reliability test remarks in page 19 xing_nie
shanghai tianma micro- electronics TM056KDH02 v2.3 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 4 of 23 1 general specifications feature spec size 5.6 inch resolution 320(rgb) x 234 interface analog rgb color depth full color technology type a-si tft dot pitch (mm) 0.118 x 0.362 pixel configuration r.g.b. vertical stripe display mode tm with normally white surface treatment(up polarizer) anti-glare viewing direction 12 o?clock display spec. gray scale inversion direction 6 o?clock lcm (w x h x d) (mm) 126.50 x 100.00 x 5.70 active area(mm) 113.280 x 84.708 with /without tsp without tsp weight (g) 123.0 mechanical characteristics led number 14 leds note 1 viewing direction for best image quality is different from tft definition, there is a 180 degree shift. note 2 : requirements on environmental protection: q/s0002 note 3: the weight tolerance: 5%.
shanghai tianma micro- electronics TM056KDH02 v2.3 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 5 of 23 2 input/output terminals 2.1 tft lcd panel driving section fpc connect type is : fh12-26s-0.5sh no symbol i/o description remark 1 gnd p ground 2 vcc p supply voltage for scan driver 3 vgl p negative power for scan driver 4 vgh p positive power for scan driver 5 stvd i/o vertical start pulse down side note 1 6 stvu i/o vertical start pulse up side note 1 7 ckv i shift clock input 8 u/d i up/down scan control input note 1 9 oev i output enable control for scan 10 vcom i common electrode driving signal 11 vcom i common electrode driving signal 12 l/r i left/right scan control input note 1 13 mod i sequential sampling and simultaneous sampling setting note 2 14 oeh i output enable control for data driver 15 sthl i/o start pulse for horizontal scan line left side note 1 16 sthr i/o start pulse for horizontal scan line right side note 1 17 cph3 i sampling and shifting clock pulse for data driver note 2 18 cph2 i sampling and shifting clock pulse for data driver note 2 19 cph1 i sampling and shifting clock pulse for data driver note 2 20 vcc p supply voltage for data driver 21 gnd p ground 22 vr i alternated video signal(red) 23 vg i alternated video signal(green) 24 vb i alternated video signal(blue) 25 avdd p supply voltage for analog circuit 26 avss p ground for analog circuit table 2.1 input terminal pin assignment i: input pin; i/o: input/output pin; p: power/gnd; note 1: select of scanning mode setting of scan control input in/out state for start pulse u/d l/r stvd stvu sthr sthl scanning direction gnd vcc o i o i up to down, left to right vcc gnd i o i o down to up, right to left gnd gnd o i i o up to down, right to left vcc vcc i o o i down to up, left to right
shanghai tianma micro- electronics TM056KDH02 v2.3 refer to the figure as below up down left right note 2: mod=h, simultaneous sampling. mod=l, sequential sampling. please set cph2 and cph3 to gnd when mod=h. 2.2 backlight unit section the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 6 of 23 pin no. symbol i/o function remark 1 hi p power supply for backlight unit pink line 2 gnd p ground for backlight unit white line
shanghai tianma micro- electronics TM056KDH02 v2.3 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 7 of 23 3 absolute maximum ratings gnd=0v, ta = 25 item symbol min max unit remark vcc -0.3 7.0 v avdd -0.3 7.0 v vgh -0.3 18.0 v vgl -15.0 0.3 v power voltage vgh-vgl - 33.0 v v a -0.2 avdd+0.2 v note 1 input signal voltage v l -0.3 avdd+0.3 v note 2 operating temperature top -20 70 storage temperature tst -30 80 table 3.1 absolute maximum rating note 1: vr, vg, vb note 2: sthl, sthr, oeh, l/r, cph1-3, stvu, stvd, oev, ckv, u/d
shanghai tianma micro- electronics TM056KDH02 v2.3 4 electrical characteristics 4.1 lcd module gnd=0v,ta=25 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 8 of 23 item symbol min typ max unit remark vcc 4.8 5.0 5.2 v logic supply voltage avdd 4.8 5.0 5.2 v analog supply voltage vgl -10.5 -10.0 -9.5 v negative power for scan driver vgh 14.3 15.0 15.7 v positive power for scan driver v 0 - 0.2xvcc v low level il input note 1 signal voltage v 0.8xvcc - vcc v high level ih output v 0 - 0.2xvcc v low level ol signal voltage high level v 0.8xvcc - vcc v oh v 0.2 - avdd-0.2 v ia v iac - 3.5 - v video signal amplitude v - avdd/2 - v idc v - 5.4 - v cac vcom 1.55 - 1.95 v v cdc i - 0.80 1.0 ma vcc i - 3.41 3.5 ma avdd i vgh - 0.056 0.059 ma note 2 power consumption i - 0.056 0.059 ma vgl table 4.1 lcd module electrical characteristics note 1: sthl, sthr, oeh, l/r, cph1-3, stvu, stvd, oev, ckv, u/d note 2: test condition: voltage fix on: vcc=5.0v, avdd=5.0v,vgh=15.0v, vgl=-10v 4.2 backlight unit ta = 2 5 item symbol min typ max unit remark i - 140 - ma forward current f forward current voltage v f - 6.4 - v backlight power consumption w bl - 896 - mw note 1 -- 10000 -- hrs note 2 operating life time 20000 table 4.2 backlight unit electrical characteristics note1: for each led, i l =20ma
shanghai tianma micro- electronics TM056KDH02 v2.3 figure 4.3 led driver circuit note 2: i is defined for one channel led. f optical performance should be evaluated at ta=25 only. if led is driven by high current, high ambient temperature & humidity condition. the life time of led will be reduced. operating life means brightness goes down to 50% initial brightness. typical operating life time is estimated data. 4,3. block diagram source ic fpc gatee ic TM056KDH02 figure 4.4 lcd module diagram the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 9 of 23
shanghai tianma micro- electronics TM056KDH02 v2.3 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 10 of 23 5 timing chart 5.1 timing parameter note 1: for all of logic signal. note 2: please don?t use odd horizontal lines to drive lcd panel for both odd and even field simultaneously. parameter symbol min. typ. max. unit. remark rising time t r - - 60 ns note 1 falling time t f - - 60 ns note 1 high and low level pulse width t cph 150 154 158 ns cph1-3 cph pulse width t cwh 40 50 60 % cph1-3 t c12 t c23 cph pulse delay t c31 30 t cph /3 t cph /2 ns cph1-3 sth setup time t suh 20 - - ns sthl/r sth hold time t hdh 20 - - ns sthl/r sth pulse width t sth - 1 - t cph sthl/r sth period t h 61.5 63.5 65.5 us sthl/r oeh pulse width t oeh - 7 - t cph sample and hold disable time t dis1 - 8 - us oev pulse width t oev - 27 - us ckv pulse width t ckv 16 - 40 us clean enable time t dis2 - 16 - us horizontal display time range t dh - 960 - t cph /3 stv setup time t suv 400 - - ns stvd/u stv hold time t hdv 400 - - ns stvd/u stv pulse width t stv - - 1 t h stvd/u horizontal line per field t v 256 262.5 268 t h note 2 vertical display start t sv - 3 - t h vertical display range t dv - 234 - t h vertical start line t slv - - 21 t h vcom rising time t rcom - - 5 us vcom falling time t fcom - - 5 us vcom delay time t dcom - - 3 us rgb delay time t drgb - - 1 us
shanghai tianma micro- electronics TM056KDH02 v2.3 5.2 timing diagram figure 5.1: sampling clock timing figure 5.2: horizontal display range timing the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 11 of 23
shanghai tianma micro- electronics TM056KDH02 v2.3 figure 5.3: horizontal display timing figure 5.4: vertical display timing the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 12 of 23
shanghai tianma micro- electronics TM056KDH02 v2.3 figure 5.5: vertical shift clcok timing figure 5.5: vertical start line timing the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 13 of 23
shanghai tianma micro- electronics TM056KDH02 v2.3 5.2. power on/off sequence 5.2.1 power on sequence figure 5.6 power on sequence vcc ? vgl ? avdd ? vgh ? data ? vbl note: the interval time should more than the label 5.2.2 power off sequence figure 5.7 power off sequence vbl ? data ? vgh ? avdd ? vgl ? vcc note: the interval time should more than the label the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 14 of 23
shanghai tianma micro- electronics TM056KDH02 v2.3 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 15 of 23 6 optical characteristics 6.1 optical specification ta=25 item symbol condition min typ. max. unit remark l 55 65 r 55 65 t 35 45 view angles b cr 10 R 55 65 degree note2,3 contrast ratio cr =0 o 200 300 note 3 ton response time to ff 25 25 50 ms note 4 x 0.260 0.310 0.360 white y 0.280 0.330 0.380 x 0.535 0.585 0.635 red y 0 .292 0.342 0.392 x 0.276 0.326 0.376 green y 0.525 0.575 0.625 x 0.091 0.141 0.191 chromaticity blue y backlight is on 0.060 0.110 0.160 note 1,5 uniformity u 70 80 % note 6 ntsc 45 50 % note 5 luminance l 300 330 cd/m 2 note 7 test conditions: 1. the ambient temperature is 25 . i l =20ma 2. the test systems refer to note 1 and note 2.
shanghai tianma micro- electronics TM056KDH02 v2.3 note 1: definition of optical measurement system. the optical characteristics should be measured in dark room. after 5 minutes operation, the optical properties are measured at the center point of the lcd screen. all input terminals lcd panel must be ground when measuring the center area of the panel. the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 16 of 23 note 2: definition of viewing a ngle range and measurement system. viewing angle is measured at the center point of the lcd by conoscope(ergo-80) fig. 6.1 definition of viewing angle item photo detector field contrast ratio luminance chromaticity lum uniformity sr-3a 1 response time bm-7a 2 photo detector field 500mm lcd panel tft-lcd module the center of the screen
shanghai tianma micro- electronics TM056KDH02 v2.3 note 3: definition of contrast ratio ?white state ?:the state is that the lcd should driven by vwhite. ?black state?: the state is that the lcd should driven by vblack. vwhite: to be determined vblack: to be determined. note 4: definition of response time the response time is defined as the lcd optical switching time interval between ?white? state and ?black? state. rise time (ton) is the time between photo detector output intensity changed from 90% to 10%. and fall time (toff) is the time between photo detector output intensity changed from 10% to 90%. note 5: definition of colo r chromaticity (cie1931) color coordinates measured at center point of lcd. the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 17 of 23
shanghai tianma micro- electronics TM056KDH02 v2.3 note 6: definition of luminance uniformity active area is divided into 9 measuring areas (refer fig. 2). every measuring point is placed at the center of each measuring area. luminance uniformity(u) = lmin/ lmax l-------active area length w----- active area width fig. 6.2 definition of uniformity lmax: the measured maximum luminance of all measurement position. lmin: the measured minimum luminance of all measurement position. note 7: definition of luminance : measure the luminance of white state at center point. the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 18 of 23
shanghai tianma micro- electronics TM056KDH02 v2.3 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 19 of 23 7 environmental / reliability test no test item condition remarks 1 high temperature operation ts=+70 , 240hrs note1 iec60068-2-2,gb2423.2 2 low temperature operation ta = - 2 0 , 240hrs iec60068-2-1 gb2423.1 3 high temperature storage (non-operation) ta=+80 , 240hrs iec60068-2-2, gb2423.2 4 low temperature storage (non-operation) ta = - 3 0 , 240hrs iec60068-2-1 gb2423.1 5 high temperature & high humidity operation ta = +60 , 90% rh max,240 hours note2 iec60068-2-78, gb/t2423.3 6 thermal shock (non-operation) -30 30 min~+80 30 min, change time:5min, 100 cycle start with cold temperature, end with high temperature iec60068-2-14,gb2423.22 7 electro static discharge (operation) 2kv,human body mode, 100pf/1500 iec61000-4-2 gb/t17626.2 8 vibration (non-operation) sine wave frequency range:10~55hz, stroke:1.5mm sweep:10hz~55hz~10hz 2 hours for each direction of x.y.z.(6 hours for total) iec60068-2-6 gb/t2423.10 9 shock (non-operation) 100g 6ms, x,y,z 3times for each direction iec60068-2-34 gb/t2423.11 10 package drop test height:80 cm 1 corner, 3 edges, 6 surfaces iec60068-2-32 gb/2423.8 11 package vibration test random vibration: 0.015g*g/hz for 5-200hz, -6db/octave from 200-500hz 2 hours for each direction of x,y,z (6 hours for total) iec60068-2-34 note1: ts is the temperature of panel?s surface. note2: ta is the ambient temperature of samples.
shanghai tianma micro- electronics TM056KDH02 v2.3 8 mechanical drawing the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 20 of 23
shanghai tianma micro- electronics TM056KDH02 v2.3 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 21 of 23 9 packing drawing 9.1 packing material table no item model (material) dimensions(mm) unit weight( k g) quantit y remark 1 lcm module TM056KDH02 126.50x100.00x5.70 0.123 50 including the dimensions of all parts 2 partition_1 corrugated paper 513x333x215 2.000 1 3. anti-static bag pe 185x140 0.010 50 anti-static 4 dust-proof bag pe -------------------- 0.060 1 5 partition_2 corrugated paper 505x332x4.00 0.100 2 6 corrugated bar corrugated paper 513x190x4 0.060 4 7 carton corrugated paper 530*350*250 0.940 1 8 total weight (kg) 10.095% 9.2 packing quantity total lcm quantity in carton : no. of partition 2 rows x quantity per row 25 = 50
shanghai tianma micro- electronics TM056KDH02 v2.3 9.3 packing drawing the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 22 of 23 1 2 3 4 5 6 7 8 9 10
shanghai tianma micro- electronics TM056KDH02 v2.3 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 23 of 23 10 precautions for use of lcd modules 10.1 handling precautions 10.1.1 the display panel is made of glass. do not subject it to a mechanical shock by dropping it from a high place, etc. 10.1.2 if the display panel is damaged and the liquid crystal substance inside it leaks out, be sure not to get any in your mouth, if the substance comes into contact with your skin or clothes, promptly wash it off using soap and water. 10.1.3 do not apply excessive force to the display surface or the adjoining areas since this may cause the color tone to vary. 10.1.4 the polarizer covering the display surface of the lcd module is soft and easily scratched. handle this polarizer carefully. 10.1.5 if the display surface is contaminated, breathe on the surface and gently wipe it with a soft dry cloth. if still not completely clear, moisten cloth with one of the following solvents: isopropyl alcohol ethyl alcohol 10.1.6 solvents other than those mentioned above may damage the polarizer. especially, do not use the following: water ketone aromatic solvents 10.1.7 do not attempt to disassemble the lcd module. 10.1.8 if the logic circuit power is off, do not apply the input signals. 10.1.9 to prevent destruction of the elements by static electricity, be careful to maintain an optimum work environment. 10.2 be sure to ground the body when handling the lcd modules. 10.3 tools required for assembly, such as soldering irons, must be properly ground. 10.4 to reduce the amount of static electricity generated, do not conduct assembly and other work under dry conditions. 10.5 the lcd module is coated with a film to protect the display surface. be care when peeling off this protective film since static electricity may be generated. 10.6 storage precautions 10.6.1 when storing the lcd modules, avoid exposur e to direct sunlight or to the light of fluorescent lamps. 10.6.2 the lcd modules should be stored under the storage temperature range. if the lcd modules will be stored for a long time, the recommend condition is: 10.7 temperature : 0 40 relatively humidity: 80% 10.7.1 the lcd modules should be stored in the room without acid, alkali and harmful gas. 10.7.2 transportation precautions 10.8 the lcd modules should be no falling and violent shocking during transportation, and also should avoid excessive press, water, damp and sunshine.

▲Up To Search▲

Price & Availability of TM056KDH02

	To Download TM056KDH02 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .